China 2279x2721x231 Heavy Duty Excavator Turntable Slewing Ring Bearing 132.45.2500 bearing and race

Type: Slewing Bearing
Applicable Industries: Accommodations, Garment Shops, Developing Content Stores, Production Plant, Machinery Restore Outlets, Foodstuff & Beverage Factory, Farms, Restaurant, House Use, Retail, Foods Shop, Printing Outlets, Building works , Energy & Mining, Food & Beverage Shops, Advertising and marketing Company, Indurstry
Model Amount: 132.forty five.2500
Characteristic: CROSS ROLLER
Seals Type: Open
Merchandise Title: Heavy Obligation Excavator Turntable Slewing Ring Bearing 132.45.2500
Material: 50Mn/42CrMo
Dimension: 2279x2721x231 mm
Rolling factors: Steel ball / Cylinder Roller
Cage Content: Nylon/ metal /copper
Mounting gap: By means of gap/Tapped hole
Modulation hardness: 229-269HB/Customized
Equipment kind: No gear ,Interior gear , Exterior equipment.
Embellish grease: EP2 lithium lubricating grease
Software: Ladle turret,Stacker crane,Bucket wheel device,excavator
Packaging Information: 1.barreled package+outer carton+pallets box+outer carton+pallets package deal+center box+outer carton+pallets 4.In accordance to your’s necessity
Port: HangZhou

2279x2721x231 Hefty Obligation Excavator Turntable Slewing Ring Bearing 132.forty five.2500

A turret bearing or slewing ring bearing is a rotational rolling-element bearing or basic bearing that normally supports a heavy but sluggish-turning or slow-oscillating load, usually a horizontal platform this kind of as a standard crane, a swing yarder, or the wind-dealing with platform of a horizontal-axis windmill. (To ” agricultural PTO shaft with Splined shaft tube slew” indicates to switch without having modify of spot.)

Compared to other rolling-element bearings, slewing bearings are slender in area and are typically manufactured in diameters of a metre or far more the slewing bearings on the Falkirk Wheel are 4 metre diameter and in shape in excess of a 3.5 metre axle. Slewing bearings resemble oversize aircraft control surface bearings.Slewing bearings usually use 2 rows of rolling elements. They usually use 3 race components, these kinds of as an inner ring and 2 outer ring “halves” that clamp with each other axially.Slewing bearings are usually manufactured with equipment teeth integral with the internal or outer race, employed to drive the system relative to the base.As for other bearings that reciprocate, fairly than rotating continually, lubrication can be tough. The oil wedge created up in a continually rotating bearing is disrupted by the cease start movement of slewing. Instead, a hydrostatic bearing with pumped oil movement could be employed.

Features of Slewing bearings:
one.with excellent rotational precision
2. Installing simplifies procedure
3. Bear big axial and radial hundreds
four.Significant cost savings in set up room
5. Large velocity capacity is limited to adjustments .
6. Shaft length and lessen processing charges, the geometry of thermal growth
seven. Nylon spacer, lower inertia, minimal starting up torque, easy to handle angle inHangZhou
eight. Optimization of preload, rigidity, higher precision CZPT rollers operating
nine. Carburizing metal offers superb affect resistance and surface abrasion resistance
10. Easy but satisfactory lubrication

Kind• Solitary row 4 position contact ball slewing bearing • Solitary row crossed cylindrical roller slewing bearings• Double row ball slewing bearings•Double row Roller/ball mix slewing bearing•Three-Row Roller Slew Ring Bearing
Rollng aspectsSteel ball / Cylinder Roller
Rollng factors ContentGCr5/GCr15SiMn/Personalized
Bearing Content50Mn/42CrMo/42CrMo4V /Personalized
Cage MaterialNylon/ steel /copper
Frameworktaper pin , Mounting holes,Internal ring ,grease fitting, Manufacturing unit Custom-made AC Solitary-period Admirer Coil Motor Double Twin Shaft AC Enthusiast Air Conditioning Motor load plug, seals , roller ,spacer balls or separators
Outer diameter50-10000mm
Bore measurementfifty-10000mm
Mounting gapBy means of hole/Tapped gap
Raceway hardness55-62HRC
Inner and outer ring modulation hardness229-269HB/Custom-made
Equipment varietyNo equipment ,Interior equipment , Exterior equipment.
Embellish greaseEP2 lithium lubricating grease
Application areaLadle turret,Stacker crane,Bucket wheel device,Photo voltaic heliostat Monitoring System,port crane, Cabling device,tower crane , offshore system,ferris wheel, Palletizing robotic,Rotary metallurgical furnace,can packing device,Wind blade transporter,shield tunneling equipment,tube drive bench,excavator
Brand name IdentifySEMRI

Bearing PartsSteel ball/Roller:carbon-chromium bearing steel GCr15SiMn or GCr15 for rolling MaterialCage: contain integral cage, phase cage and spacer-variety cage. We use 20# steel or copper for integral and segment cages, 6 grooves large pulley wheel steel materials for gearbox pulley PA 1571 resin or QA110-3-one hundred and five albronze for spacer-sort cages.Seals:uses NBR or VI-TON, few felted wool.
Single row cross roller slewing bearingIt is composed of 2 or 3 rings. It has compact construction, light fat, substantial producing precision, small assembly hole and large prerequisite for set up precision. Rollers are 1:1 cross-arranged. It can bear axial force, overturning minute and huge radial power at the exact same time. It is extensively used in lifting transportation, design equipment and military items
Three row roller slewing bearingIt have 3 seat rings, the higher and decrease raceways and the radial raceways are separated, so that the load of each row of roller can be identified properly. Becoming CZPT to bear all varieties of hundreds at the same time, it is the largest 1 of the 4 structural items with big axle and radial proportions and company structure. It is specially appropriate for heavy equipment demanding bigger diameter, this sort of as bucket wheel stacker and reclaimer, wheel crane, maritime crane, port crane, ladle turret and big tonnage truck crane. Weighty equipment and so on.
Solitary row 4 level speak to ball slewing bearing.It is composed of 2 seat rings. It has compact composition, gentle weight, and 4-point make contact with in between metal ball and arc raceway. It can bear axial power, radial force and overturning instant at the same time. The design equipment of rotary conveyor, welding manipulator, modest and medium-sized crane and excavator can be chosen.

Other Models of Slewring Bearings:

132.twenty five.560426694148240
132.twenty five.630496764148270 hundred576844148three hundred
132.32.9007361064182600 thousand8361164182680
132.forty five.2000177922212312400
132.forty five.2240201924612312700
132.forty five.2240.0320192556231
132.forty five.2500227927212313000


Firm Information
Our benefit

1.Q:Are you a factory or trading firm?
A:SEMRI Bearing is specialised in producing and exporting bearings.
SEMRI Bearing have very own factory and warehouse.

2.Q:Can I get some samples and do you supply the sample totally free?
A:Yes, sure, SEMRI Bearing are honored to offer you you samples.Can you buy a ticket ?

3.Q:What is the payment?
A: 30% T/T In Progress, 70% T/T Against Duplicate Of B/L
B: a hundred% L/C At Sight
4.Q:What is the MOQ for bearing? A: SEMRI Bearing MOQ is 1 computer.
5.Q:What type of provider you can offer?
A:Technological innovation supportInstallation guidanceOEM.

Types of Ball Bearings

If you’re looking to purchase a new ball bearing, there are many different types available. Learn about Single-row designs, Ceramic hybrid bearings, and Self-aligning ball bearings. You can also choose from stainless steel or single-row designs. Then, read about the different types of materials available to you. You’ll have an easier time making a decision. After all, you won’t have to worry about maintaining your new ball bearing, since it will be maintained by your supplier.

Single-row designs

Ball bearings with a single-row design have a high load-carrying capacity. They are used in applications where high loads must be handled smoothly. A single-row design is a good choice when the material’s properties require high load-carrying capacity but limited axial load capability. Single-row designs use two bearings with similar design features, but they have different mounting methods. Single-row designs can be adjusted either against one another to accommodate axial loads.
The single-row design is suitable for high-speed applications, but also has some disadvantages. The contact angle a is the angle between the radial plane and contact line. The larger the angle, the higher the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are suitable for higher axial forces. Single-row angular contact ball bearings have a single-row design and support high axial forces in one direction. Single-row ball bearings are available in both pressed steel and machined steel cages.
Angular contact ball bearings with a single row feature a cage made of fiber-glass reinforced polyamide 66. These are available in diameters up to 130 mm. Four-point angular contact ball bearings use brass, steel, or brass plate. They have good running properties and a low coefficient of linear expansion. Single-row designs are easy to mount and are widely available. Alternatively, they can be mounted with a universal match design, which allows them to be easily adjusted.
One-row angular contact ball bearings are generally not suitable for angular misalignments because they are unsuitable for compensation of angular misalignments. Misalignments cause internal forces in the bearing which reduce its radial load capacity and life expectancy. This type of bearing is not suitable for adjacent mounting as it increases the chances of misalignment. However, it is a suitable choice for applications where only one bearing is required per bearing position.

Ceramic hybrid bearings

While all-ceramic bearings are limited to very specialized applications, Si3N4-based hybrid bearings are finding use in a wide range of high-speed machines. Compared to steel, ceramics are less susceptible to centrifugal forces, which are directly proportional to the mass of the balls. Because Si3N4 replacement balls have a lower density than steel, these bearings reduce the stress placed on the outer race.
The benefits of hybrid bearings are clear: they allow for higher speeds and loads than full-ceramic bearings, and they require no lubrication. Because of their many benefits, many industrial equipment operators are switching to these innovative bearings. CBR is one company that specializes in ceramic hybrid bearings and can help you find the best product for your application. If you are thinking about purchasing ceramic bearings for your next machine, here are some things you need to know about them.
A ceramic ball bearing surface has an extremely low coefficient of friction, which is important for applications that require low friction and high speeds. Ceramic balls also have a higher hardness than steel balls, which increases their life. In addition to this, ceramic hybrid bearings have superior thermal properties, generating less heat even when spinning at high speeds. These properties make ceramic hybrid bearings an ideal choice for high-speed machinery, especially electric motors. They are also suitable for applications that operate under water.
A ceramic ball hybrid bearing is much less susceptible to temperature fluctuations and wear. Because they are essentially indestructible, ceramic balls do not generate wear particles from the adhesive wear. They can run at significantly higher speeds than steel balls. Ceramic balls are also more resistant to moisture. For this reason, grease is a recommended lubricant in most ceramic bearing applications. These lubricants offer superior protection against moisture and corrosion. Further, they are available in many types.

Self-aligning ball bearings

A self-aligning ball bearing is one type of self-aligning bearing. These bearings are recommended for use in flex shaft systems. Their self-aligning feature prevents them from misaligning when in use. They can be used in both single and multiple-joint systems. In addition to self-aligning ball bearings, these units also feature flex shafts.
These self-aligning ball bearings come in a variety of configurations, including cylindrical, round, tapered, and straight bore. Their inner ring is tapered to meet specific tolerances. They are suitable for operating temperatures ranging from -30°F to 120°F. Their wide range of applications allows them to be used in general machinery, precision instruments, and low noise motors. In addition, they are available in a variety of outside diameters, widths, and internal clearances.
Self-aligning ball bearings have two rows of balls and one common sphered raceway in the outer ring. This enables them to automatically compensate for angular misalignment, which may be caused by machining and assembly errors or deflections. Compared to spherical roller bearings, these self-aligning ball bearings generate less friction. They run cooler even at high speeds. Self-aligning ball bearings also offer free engineering support.
Self-aligning ball bearings are designed for difficult shaft alignment. They are double-row, self-retaining units, with cylindrical or tapered bores. These bearings are available in open and sealed designs, and can also be used in applications with misalignment. They are also available with an outer ring that rotates in relation to the inner ring. When it comes to shaft misalignment, self-aligning ball bearings are a great solution.

Stainless steel

Stainless steel is a metal that resists corrosion and is highly durable. Its corrosion-resistant and water-resistance properties make it a good choice for bearings in food and marine applications. Additionally, stainless steel has hygienic benefits. Here are some of the benefits of stainless steel ball bearings. Read on to learn more about these amazing bearings! We’ve included some of the most common uses for stainless steel.
Hardness is important in a ball bearing. Steel uses the Rockwell C scale to measure hardness. A grade 25 steel ball bearing is accurate to 25 millionths of an inch, while a grade five ceramic bearing is less than a half-inch round. Although roundness is important, it shouldn’t be overemphasized, as the bearing surfaces may not be as accurate as the grade of the metal. And remember, a higher price tag doesn’t mean a better product.
Stainless steel ball bearings are available in a variety of alloys. The alloys used in manufacturing a stainless steel ball bearing vary in hardness, strength, and ductility. Stainless steel ball bearings have high corrosion-resistance properties. Additionally, they have long lubrication lives. These benefits make them a popular choice for industrial applications. These bearings are easy to maintain, reduce replacement costs, and offer corrosion resistance.
The NTN Sentinel Series is a premium line of stainless steel bearings. The solid lube is NSF H1 registered and prevents grease from leaching into food. It is also corrosion-resistant and doesn’t need to be coated. The seals and slinger create a water-resistant barrier between the steel ball and the lubricant. It also adds safety and security to the bearing.

Plastic balls

For applications where noise and weight are major concerns, plastic balls are ideal. These non-magnetic balls are ideal for MRI X-ray machines and sensors. They are also easy to lubricate, and are non-magnetic. A polymer ball bearing is the lightest of all three types. This makes them a good choice for many industries. Read on to learn more. This article will introduce some of the advantages of plastic balls for ball bearings.
Although ceramic ball bearings are more durable and offer many advantages, they are more expensive than plastic. Fortunately, plastic ball bearings offer a cheaper alternative. These bearings feature all-plastic races and cages. Depending on the application, plastic balls can be used in applications involving chemicals. In these cases, plastic ball bearings are available with a C160 grade, which is safe for use in temperatures below 176 deg F.
Medical devices often require precision specialty balls, which are made of glass, stainless steel, and plastic. These bearings must meet stringent cleanliness requirements. To meet the most stringent requirements, they must undergo ultrasonic cleaning. These bearings are available in plastic raceways, and are also available with glass or stainless steel balls. Polyethylene balls are lightweight and can be used in a variety of applications. They can be ordered in different sizes and tolerances to meet specific requirements.
Plastic balls for ball bearings are often mounted into other parts, such as plastic wheels, pulleys, and housings. They can be seamlessly integrated into other parts of a machine, which reduces assembly time and improves affordability. One important advantage of plastic bearings is that they are rust-resistant. As such, they can be used in harsh environments without causing any damage. If a piece of equipment is exposed to extreme temperatures, polymers are the ideal choice.

China 2279x2721x231 Heavy Duty Excavator Turntable Slewing Ring Bearing 132.45.2500     bearing and raceChina 2279x2721x231 Heavy Duty Excavator Turntable Slewing Ring Bearing 132.45.2500     bearing and race
editor by czh 2023-02-16

Recent Posts