China Standard 6801 2RS Thin Wall Shielded 12*21*5mm ABEC3 Deep Groove Ball Bearing bearing and race

Product Description

Product Description

6800 series deep groove ball bearings

 other products: product-list-1.html

Bearing NO (mm)Boundary Dimensions (Kn) (Kn) (r/min)
Limit Rotational Speed
(Kg)
Weight
d D B Dynamic Load Rating
Cr
Static Load Rating
Cor
Grease Lubrication Oil Lubrication
6800 10 19 5 1.72 0.84 34000 40000 0.0053
6801 12 21 5 1.92 1.04 32000 38000 0.0068
6802 15 24 5 2.07 1.26 28000 34000 0.0075
6803 17 26 5 2.63 1.57 26000 30000 0.0083
6804 20 32 7 4.0 2.47 22000 26000 0.02
6805 25 37 7 4.5 3.15 18000 22000 0.571
6806 30 42 7 4.7 3.65 15000 18000 0.026
6807 35 47 7 4.9 4.1 14000 16000 0.571
6808 40 52 7 6.35 5.5 12000 14000 0.033
6809 45 58 7 6.6 6.15 11000 13000 0.041
6810 50 65 7 6.4 6.2 9500 11000 0.054
6811 55 72 9 8.8 8.5 8500 10000 0.081
6812 60 78 10 11.5 10.9 8000 9500 0.101
6813 65 85 10 11.9 12.1 7500 8500 0.12
6814 70 90 10 12.1 12.7 6700 8000 0.13
6815 75 95 10 12.5 13.9 6300 7500 0.14
6816 80 100 13 12.7 14.5 6000 7100 0.15
6817 85 110 13 18.7 20 5600 6700 0.27
6818 90 115 13 19.0 21 5300 6300 0.28
6819 95 120 13 19.3 22 5000 6000 0.29
6820 100 125 13 19.6 23 4800 5600 0.31
Note:Above-mentioned products include its modification series,such as Z,2Z,RS,and 2RS etc.

 

Detailed Photos

 


Black chamfer with rubber seal

Black chamfer with white dust cover

open UG

white chamfer with yellow dust cover

ceramic ball bearing

THE USE OF THE BEARING
Some tips on use
Rolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.
(1) Keep clean the bearing and its surrounding areas
It is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.
(2) Use bearing carefully
Scar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.
(3) Use the appropriate operating tool
Avoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.
(4) Be careful to the rust corrosion of the bearings
The sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You’d better wear gloves in doing the work. 
(5) Handler should familiar with bearing
(6) Establish bearing handling criteri
·Bearing storage
.Bearing and surrounding cleaning
.Dimension of mounting parts and inspection
.Machining quality
.Mounting handing
.After mounting inspection
·Disassembly handing
·Keep maintain
·Adding lubricant

 

Installation Instructions

 Bearing mounting
 Precautions for proper mounting of bearing
1) Bearing preparation
Bearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.
2) Inspection of shafts and housings
Cleaning shaft and housing, confirming no scratched or machine burrs, no CZPT and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.
chart 1 Measure location for shaft diameter                                                                         chart 2  Measure location for housing bore diameter                       

As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.
Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.

Bearing storage
Before leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.
For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.
In addition, storage occasion should avoid sunshine and contact with cold wall.

Pictures about packaging

 

Company Profile

Our Advantages

1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
    pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Motor Parts: Motor Bearing
Water Pump Parts: Water Pump Bearing
Air Compressor Parts: Air Compressor Bearing
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

black or white or as required
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

shielded bearing

How to identify the specifications of a shielded bearing?

Identifying the specifications of a shielded bearing is essential for selecting the appropriate replacement or determining compatibility with a specific application. Here’s a detailed explanation of how to identify the specifications of a shielded bearing:

  1. Manufacturer markings: Start by examining the bearing for any markings or labels provided by the manufacturer. These markings typically include important information such as the manufacturer’s logo, bearing part number, and sometimes additional codes or symbols.
  2. Bearing part number: The bearing part number is often the most crucial piece of information for identifying the specifications of a shielded bearing. It usually consists of a combination of letters, numbers, and symbols unique to that specific bearing model. The part number can be used to cross-reference with the manufacturer’s catalog or website to obtain detailed specifications.
  3. Bearing type and series: Determine the type of shielded bearing, such as deep groove ball bearing, angular contact bearing, or cylindrical roller bearing. Additionally, note the bearing series, which indicates the design and performance characteristics of the bearing within a specific size range.
  4. Size dimensions: Measure the bearing’s inner diameter (ID), outer diameter (OD), and width (or thickness). These dimensions are commonly expressed in millimeters (mm) and are crucial for ensuring compatibility with the bearing housing or shaft.
  5. Load and speed ratings: The load and speed ratings of a shielded bearing indicate its capacity to handle radial and axial loads, as well as its maximum allowable rotational speed. These ratings are typically specified by the manufacturer and can be found in their catalog or technical documentation.
  6. Bearing materials: Take note of the materials used in the construction of the shielded bearing, especially the inner and outer rings, rolling elements, and shields. Common materials include stainless steel, chrome steel, ceramics, and various types of polymers. The choice of materials can affect the bearing’s performance and suitability for specific environments.
  7. Sealing or shielding type: Determine the specific type of shield used in the bearing, such as metal shields (usually made of steel or stainless steel) or non-metallic shields (such as rubber or plastic). This information is important for understanding the level of protection provided by the shield against contaminants and debris.
  8. Additional features: Some shielded bearings may have additional features or specifications, such as special coatings for enhanced corrosion resistance, high-temperature capabilities, or specific industry certifications. These features should be identified and considered if they are relevant to the intended application.

It’s important to note that the above steps provide a general guideline for identifying the specifications of a shielded bearing. The specific information and format may vary depending on the manufacturer and bearing model. Consulting the manufacturer’s catalog, technical documentation, or reaching out to their customer support can provide more detailed and accurate information about the bearing’s specifications.

shielded bearing

How to choose the right shielded bearing for my equipment?

Choosing the right shielded bearing for your equipment is crucial to ensure optimal performance, longevity, and reliability. Here’s a detailed explanation of the steps involved in selecting the right shielded bearing:

  1. Identify the application requirements: Start by understanding the specific requirements of your equipment and its operating conditions. Consider factors such as load (both radial and axial), speed, temperature, vibration, and environmental conditions. Determine the desired bearing life, maintenance intervals, and any special considerations unique to your application.
  2. Understand the bearing characteristics: Familiarize yourself with the different types of shielded bearings available and their respective characteristics. Consider factors such as the type of rolling elements (ball or roller), bearing material, lubrication requirements, and sealing options. Each characteristic affects the bearing’s performance in terms of load capacity, speed capability, temperature resistance, and durability.
  3. Consult bearing manufacturer catalogs and specifications: Refer to the catalogs, technical datasheets, and specifications provided by reputable bearing manufacturers. These resources contain detailed information about the available shielded bearings, including their dimensions, load ratings, speed limits, and other relevant data. Identify bearings that meet your application requirements based on the manufacturer’s recommendations.
  4. Consider bearing material and construction: Evaluate the suitability of different bearing materials for your application. Common options include steel, stainless steel, ceramics, and plastic. Consider factors such as corrosion resistance, temperature resistance, load capacity, and the specific conditions in which the equipment operates. Additionally, evaluate the bearing’s construction, such as the number of shields, cage design, and any special features that enhance performance or reliability.
  5. Calculate the bearing load: Determine the expected load on the bearing, considering both the radial and axial components. Calculate the equivalent dynamic load and static load based on the operating conditions, and compare them against the bearing’s load ratings provided by the manufacturer. Ensure that the selected bearing can handle the anticipated load without premature failure or excessive wear.
  6. Consider lubrication and sealing: Evaluate the lubrication requirements of the shielded bearing. Determine whether the bearing requires grease or oil lubrication and consider factors such as operating speed, temperature, and contamination levels. Additionally, assess the sealing options available for shielded bearings. Seals can help protect the bearing from contaminants and retain lubrication, enhancing its performance and service life.
  7. Seek expert advice: If you’re uncertain about the selection process or have specific application challenges, consider reaching out to bearing manufacturers or their authorized distributors. Their technical experts can provide valuable guidance and recommend the most suitable shielded bearing for your equipment based on their expertise and experience.

By following these steps and considering the relevant factors, you can choose the right shielded bearing that matches your equipment’s requirements. Remember to ensure compatibility with the shaft and housing, and follow proper installation and maintenance practices to maximize the bearing’s performance and longevity.

shielded bearing

What are the advantages of using shielded bearings?

Shielded bearings offer several advantages over other types of bearings. Here’s a detailed explanation of the advantages of using shielded bearings:

  • Contamination Protection: One of the main advantages of shielded bearings is their ability to provide protection against contamination. The shields act as a physical barrier, preventing dust, dirt, moisture, and other contaminants from entering the bearing. This helps maintain the cleanliness of the internal components, reducing the risk of premature wear, damage, or failure.
  • Lubrication Retention: Shielded bearings also help retain lubrication within the bearing. The shields help to contain the lubricant and prevent it from escaping or being contaminated by external factors. This ensures that the rolling elements and raceways are adequately lubricated, reducing friction and wear, and promoting smoother operation and extended bearing life.
  • Simplicity and Cost-Effectiveness: Shielded bearings are relatively simple in design, consisting of an outer shield and an inner ring with rolling elements. This simplicity makes them easy to install and maintain. Additionally, shielded bearings tend to be more cost-effective compared to other bearing types, making them suitable for a wide range of applications.
  • Space-Saving: Shielded bearings have a compact design and do not require additional sealing components. This makes them space-saving and allows for more efficient use of available space in various applications and systems.
  • Speed and Temperature Capability: Shielded bearings are capable of operating at high speeds and handling moderate temperature variations. They are designed to provide stable performance and low friction even under demanding operating conditions.
  • Versatility: Shielded bearings are available in a variety of sizes, configurations, and materials to suit different application requirements. They can be used in a wide range of industries and systems, including automotive, industrial machinery, appliances, and more.
  • Easy Replacement: In the event of bearing failure or maintenance requirements, shielded bearings are relatively easy to replace. The shields can be removed to access the internal components for inspection, lubrication, or replacement, simplifying the maintenance process.

It’s important to note that while shielded bearings offer advantages in terms of contamination protection and lubrication retention, they may not provide the same level of sealing effectiveness as sealed bearings or other specialized bearing types. The choice of bearing type should be based on the specific requirements and operating conditions of the application.

By leveraging the advantages of shielded bearings, you can enhance the performance, reliability, and service life of rotating equipment and systems.

China Standard 6801 2RS Thin Wall Shielded 12*21*5mm ABEC3 Deep Groove Ball Bearing   bearing and raceChina Standard 6801 2RS Thin Wall Shielded 12*21*5mm ABEC3 Deep Groove Ball Bearing   bearing and race
editor by CX 2024-03-25

Recent Posts