Merchandise Description
Item Description
This bearings does not allow any horizontal motion,but is capable of absorbing rotational movement about any horizontal axis by usage of the elastomer pad.
It is composed of a steel piston supported by a disc of unreinforced elastomer confined in a metallic cylinder which offers the load carrying medium.
These compact, lower height bearings are excellent for vertical loads upto any capability. Suited for curved and straight concrete an steel bridges in seismic regions.
We manufacture several varieties of pot bearings – including mounted pot bearings, sliding guided pot bearings and cost-free sliding pot bearing
The fundamental elements of a Pot Bearing is made up of a shallow cylinder, recognized as pot, an elastomeric pad known as disc,a one or set of sealing rings, piston and sliding surfaces. Masonry plates and base plates are widespread for the installation of pot bearings, as they allow attachment of the bearings and enhance the support area on the pier and abutment. Pot bearings are fixed towards all translation except if they are used with a PTFE sliding surface.
Positive aspects of Pot bearings:
Pot bearings are usually advised when bearing rotations are huge, compact patterns and extended time period servesability are needed.
Pot bearings gives longer support life compared to elastomeric bearings.
Smaller sized in measurement in comparison to elastomeric bearings.
More time routine maintenance time.
Pot bearings can maintain a lot of cycles of very small and big rotations.
Affordable fix as alternative of elastomer disc only.
Does not get effected by exterior atmospheric correction.
Additional fixtures for Pot Bearings:
We also supply added fixtures for set up of pot bearings like short-term bearings, PTFE sliding bearings, studs, foundation plates, masonry plates with welded studs and many others and will be pleased to receive your full specifications.
Comprehensive Images
Firm Profile
Haigger, launched in early 2000, is specialised in producing bridge bearing, bridge enlargement joint, constructing enlargement joint, and development bearing. Our organization has a registered money of 8, 800, 000 us pounds, it handles an spot of 50, 000 square meters, with a development location of 20, 000 sq. meters, there are 200 workers now in our company.
Haider is a modern day organization which has a leading technological innovation in China, and the sophisticated creation equipment, best screening products.
It has passed the ISO9001: 2008 international top quality technique certification and ISO14001: 2004 environmental management method certification.
We have a strong technological power and a specialist installation crew, perfect right after-sales services in our firm. In excess of numerous years, our products have been commonly utilised in freeway, railway bridges, community structures, and many others. We have also effectively get participate in numerous countrywide key tasks and numerous landmark project. This sort of as: Xihu (West Lake) Dis. worldwide airport, ZheJiang money worldwide airport and HangZhou worldwide airport, HangZhou international airport, HangZhou international airport ZheJiang maglev, ZheJiang gentle rail, light rail ZheJiang , HangZhou metro ZheJiang CZPT hub, and HangZhou 6 wide river bridge, ZheJiang HangZhou xiangjiang river bridge, HangZhou tianxingzhou yangtze river bridge, zHangZhoug HangZhouajian bridge.
Delivery&Shipping and delivery
one.Security package deal, A few methods of packages,pearl cotton,carton and plywood for the transportation
two.one hundred% check just before delivering (ensure the good quality)
3.Item transported in about fifteen operating times against payment depends on the quantity
4.Monitoring quantity will be sent to you as soon as we ship the product
Our Service
FAQ
| FAQ(Frequently Asked Questions) |
| 1. You are a trading company or manufacturer? |
| -We are manufacturer, and have our own factory. |
| 2. What certificate do you get? |
| – ISO9001-2008. |
| three. What is your MOQ? |
| -100m. |
| four. What is your delivery time when making mass production? |
| -About 15 days, the actual time depends on your order quantity. |
| 5. Can you do OEM? |
| -Indeed, we can. OEM is welcomed. |
| six. What is your sample policy? |
| -We offer free samples, and the buyer takes responsibility of the express charge. |
| 7. How long will it take to prepare samples? |
| -About 3-4 functioning times. |
|
/ Piece | |
2 Pieces (Min. Order) |
###
| Material: | Steel |
|---|---|
| Application: | Transportation |
| Technics: | Casting |
| Movement: | 50-500mm |
| Vertical Load: | 0.5-60mn |
| Certification: | CE, ISO |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| FAQ(Frequently Asked Questions) |
| 1. You are a trading company or manufacturer? |
| -We are manufacturer, and have our own factory. |
| 2. What certificate do you get? |
| – ISO9001-2008. |
| 3. What is your MOQ? |
| -100m. |
| 4. What is your delivery time when making mass production? |
| -About 15 days, the actual time depends on your order quantity. |
| 5. Can you do OEM? |
| -Yes, we can. OEM is welcomed. |
| 6. What is your sample policy? |
| -We offer free samples, and the buyer takes responsibility of the express charge. |
| 7. How long will it take to prepare samples? |
| -About 3-4 working days. |
|
/ Piece | |
2 Pieces (Min. Order) |
###
| Material: | Steel |
|---|---|
| Application: | Transportation |
| Technics: | Casting |
| Movement: | 50-500mm |
| Vertical Load: | 0.5-60mn |
| Certification: | CE, ISO |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| FAQ(Frequently Asked Questions) |
| 1. You are a trading company or manufacturer? |
| -We are manufacturer, and have our own factory. |
| 2. What certificate do you get? |
| – ISO9001-2008. |
| 3. What is your MOQ? |
| -100m. |
| 4. What is your delivery time when making mass production? |
| -About 15 days, the actual time depends on your order quantity. |
| 5. Can you do OEM? |
| -Yes, we can. OEM is welcomed. |
| 6. What is your sample policy? |
| -We offer free samples, and the buyer takes responsibility of the express charge. |
| 7. How long will it take to prepare samples? |
| -About 3-4 working days. |
The Benefits of Using Self-Lubricating Bushings for Your Next Pivot
Like any other auto part, control arm bushings wear out over time. This results in an increase in irritating vibrations that can be dangerous in severe cases. The bushings in the control arms also wear out due to the stress that extreme driving conditions put on the control arms. Additionally, environmental factors and oversized tires tend to transmit more vibration through the bushing than conventionally sized tires. Whatever the cause, bushings can be the source of many problems.
wear and cracking
The main cause of dry valve side bushing cracking is a mismatch in thermal expansion of the core and flange. This situation can seriously compromise the safety of the power system. To improve the safety of dry valve side bushings, the crack development of epoxy impregnated paper under various conditions was investigated. A coupled thermomechanical simulation model was also used to study the cracking process.
The first step in diagnosing the cause of bushing wear and cracking is a visual inspection. The bushing of the lower control arm is fixed to the frame by a bracket. If there are any visible cracks, it’s time to replace the bushing. However, there is no need to replace the entire suspension. In some cases, worn bushings can cause a variety of problems, including body lean, excessive tire wear and cornering noise.
Maintenance free
If you’re considering maintenance-free bushings for your next pivot, you’ll be wondering what to look for in these components. The bushing protects the housing from corrosion and keeps the bushing under pressure. However, many users are not familiar with what these components can do for their applications. In this article, we’ll look at several examples of truly maintenance-free pivots and discuss their requirements.
One of the most popular types of maintenance-free bushings are flanged and parallel. Unlike worm gear bushings, these self-lubricating metal bearings are ideal for a variety of applications and conditions. They reduce failure and downtime costs while providing the long-term lubrication required by other types of bushings. Since these sleeves are made of lead-free material, they are RoHS compliant, which means they are environmentally friendly.Another common maintenance-free bushing is plastic. This material is easier to find off-the-shelf and relatively inexpensive to produce. However, it is not suitable for high load applications as it will crack under heavy loads and damage mating parts. Plastics can also deviate if the manufacturing process is imprecise. Plastic bushings can also crack when subjected to high loads.
self-lubricating
When using a self-lubricating bushing, there is no need to apply grease to the bushing. Oily liquids tend to attract dirt and grit, which can wear away the graphite prematurely. By eliminating the need for regular lubrication, you will reduce equipment maintenance costs. This article will explore the benefits of self-lubricating bushings. You will love your kindness.
Self-lubricating bushings have a strong base material to withstand radial bearing pressure while providing shaft support at the contact surfaces. The material also has good fatigue properties and low friction motion. Self-lubricating bushings can be used in environments with high temperatures and aggressive media. These products can also withstand enormous pressure. When using self-lubricating bushings, it is important to select the correct material.
The main advantage of using self-lubricating bushings is ease of maintenance. They don’t require oil to run and are cheaper to buy. Their main benefit is that they can significantly reduce your machine running costs. These bearings do not require oiling operations, reducing maintenance costs. These bearings also offer a simplified mechanical design due to their thin walls and high load capacity. In addition, they reduce noise levels while maintaining excellent wear resistance. Plus, their materials are ROHS compliant, which means they don’t require oil.
Hydropower installations are another area where self-lubricating bushings have proven their advantages. They reduce maintenance costs, extend equipment life, and improve environmental benefits. For example, the Newfoundland Power Company uses self-lubricating bushings in the gates of its hydroelectric power plants. These self-lubricating bushings eliminate grease from entering waterways and tailraces. As a result, power companies are able to reduce maintenance and costs.
compared to cartilage in the human body
What is the difference between tendon, bone and cartilage? Human cartilage is composed of collagen and elastic fibers. In contrast, fibrocartilage contains more collagen than hyaline cartilage. Both cartilage types are composed of proteoglycans, which have a protein backbone and glycosaminoglycan side chains. These components work together to provide structure and flexibility to the cartilage.
Bone is a combination of living and dead cells embedded in a matrix. The outer hard layer of bone is dense bone, and the inner layer is spongy, containing bone marrow, blood vessels, nerves, etc. Bone contains both organic and inorganic substances, and this process of hardening of the matrix produces bone. On the other hand, cartilage consists of chondrocytes and a matrix composed of collagen and elastin fibers. Compared to bone, cartilage is yellow and contains elastic fibers.
Although bone and cartilage are structurally identical, cartilage is more flexible. It is mainly found in the joints and respiratory system and requires flexibility. Its ingredients include collagen and proteoglycans, which provide compression and abrasion resistance. Furthermore, connective tissue is composed of cells, fibers and matrix.
The basic substance of cartilage is chondroitin sulfate, which is derived from animals. Although cartilage grows more slowly than bone, its microstructure is less organized. There is a fibrous sheath covering the cartilage, called the perichondrium. The molecular composition of the ECM plays an important role in the function of cartilage. The collagen matrix is important for cartilage remodeling and consists of changes in the collagen matrix.
Compared to metal-on-bone contact
Both metal-on-bone contact are known to cause a significant increase in the pressures in a joint. To compare the two, we first calculated the joint contact pressures in each model and compared them. The results of this study support previous research on this subject. The following sections discuss the benefits of both types of contact. They also outline some key differences between the two.
editor by CX 2023-04-07